





Wholesale faux wood table tells: What are the painting steps in the production of hotel furniture?
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-06-07 15:31
- Views:
(Summary description)For board processing, the board must be cleaned before painting. Use a vacuum cleaner to vacuum a large area repeatedly, and pay attention to protect the veneer.
Wholesale faux wood table tells: What are the painting steps in the production of hotel furniture?
(Summary description)For board processing, the board must be cleaned before painting. Use a vacuum cleaner to vacuum a large area repeatedly, and pay attention to protect the veneer.
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-06-07 15:31
- Views:
There is an important painting step in the production of hotel furniture, so do you know what the painting steps are? Let’s follow the Wholesale faux wood table editor to have a simple look at it!
1. Panel processing, the panels must be cleaned before painting, use a vacuum cleaner to vacuum a large area repeatedly, and pay attention to protect the veneer.
2. The board sealant is brushed and evenly applied to the board, which can effectively prevent the board from being polluted, enhance the adsorption force between the paint film and the board, and achieve the effect of saving paint.
3. Scrape of putty, use putty to fill the unevenness of the wood, here it should be noted that open and closed paint have different requirements for putty, and the color of open paint putty should be adjusted to the same as that of the board.
4. Start applying the primer, adjust the ratio of the primer, and spray evenly. The primer can fill the wood holes and increase the thickness of the paint film. After the primer is dry, it should be polished and evened, and then sprayed again. Achieve no sagging and smooth filling of wooden eyes,
5. Sanding treatment, sanding with sandpaper, sanding treatment can make the board more uniform and smooth, which is good for painting.
6. The top coat spraying must be cleaned again before the top coat spraying. It is not advisable to spray too thick at one time during spraying. It can be dried and sprayed again to maintain uniformity, no sagging, good gloss, and delicate hand feeling.
To sum up, the editor of Wholesale faux wood table tells: about the introduction of the painting steps of hotel furniture in the production, you can know more about it.
Copyright © 2020 Boscher Environmental Furniture Co., LTD
粤ICP备2020108828号 PowerBy:300.cn shunde
