Wholesale Outdoor patio Furniture introduces the common problems of mahogany furniture in winter
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-12-07 11:24
- Views:
(Summary description)Surface cracking is generally caused by air drying, and shrinkage gaps generally adopt different methods depending on the size of the gap. That is, if the gap is large, you need to choose the same wooden strips according to the material of the furniture, trim the wooden strips to the size of the gap, and then stuff them into the gap;
Wholesale Outdoor patio Furniture
Surface cracking is generally caused by air drying, and shrinkage gaps generally adopt different methods depending on the size of the gap. That is, if the gap is large, you need to choose the same wooden strips according to the material of the furniture, trim the wooden strips to the size of the gap, and then stuff them into the gap;
Wholesale Outdoor patio Furniture introduces the common problems of mahogany furniture in winter
(Summary description)Surface cracking is generally caused by air drying, and shrinkage gaps generally adopt different methods depending on the size of the gap. That is, if the gap is large, you need to choose the same wooden strips according to the material of the furniture, trim the wooden strips to the size of the gap, and then stuff them into the gap;
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-12-07 11:24
- Views:
Do you know the common problems of mahogany furniture in winter? The editor of Wholesale Outdoor patio Furniture will take you here today.
1. Surface cracking
Surface cracking is generally caused by air drying, and shrinkage gaps generally adopt different methods depending on the size of the gap. That is, if the gap is large, you need to choose the same wood strip according to the material of the furniture, trim the wood strip to the size of the gap, and then stuff it into the gap; if the crack is small, you can drop 502 glue into the gap and fill in some sawdust , And then use sandpaper to smooth the surface of the furniture filled with glue, repeat with sandpaper, and then wax again, until the surface of the furniture becomes smooth and flat. The post-processing method of filling wood strips is the same.
2. Furniture deformation
If it is slightly deformed, it is generally smoothed with a sander, and then polished with sandpaper and waxed. If the deformation is severe, then you have to "make a big move", you need to spray the deformed part with water, and then use a hot air gun to fully heat the place, press a piece of straight and flat wood on it, fix the ends with clamps, and let the two surfaces Make full contact, and let the deformed wood straighten with the fixed board by placing it for one to two days; if the deformation is particularly serious, you need to repeat it 2-3 times. It should be noted that the hardness of the wood used for shaping must be greater than that of the furniture wood. The size of the shaping clip depends on the degree of deformation. The roasting gun also has liquefied gas and roasting lamps to choose from, but the speed caused by the difference in power is different. one.
In summary, the editor of Wholesale Outdoor patio Furniture tells: a brief introduction to the common problems related to mahogany furniture in winter.
Copyright © 2020 Boscher Environmental Furniture Co., LTD
粤ICP备2020108828号 PowerBy:300.cn shunde
