No data
Composite patio furniture introduces the identification method of furniture
Do you know what is the identification method of furniture? Follow the editor of composite patio furniture to have a simple understanding!
1. Look at whether the patina is natural: In general, old furniture will have a naturally formed patina where the user's hands often touch it. The patina in the new imitation product is either unnatural, or there are also places where the furniture is not often touched. Patina.
2. Look at the bottom plate and drawer board of the furniture: the bottom plate and drawer board of the old table have an old look that doesn't look like it. One of the important points is that it depends on the mortises of old furniture. The mortises of old furniture are square, and the mortises that lock the tenons are the tops. If you see that the mortise is round at both ends, it means it was machined, and it must be a new imitation.
3. Look at the wood grain: uneven wood grains appear on the surface of some furniture, but it depends on whether the wood grains are hard rubbed with a wire brush.
4. Look at the refurbishment traces: After some cloth-covered chairs are refurbished, the original seat ring will leave dense nail holes. This kind of chair is old, and you can see these eyes as long as you turn the chair over.
The above is what the editor of composite patio furniture tells: about the identification knowledge of furniture,
Related News
Transform Your Outdoor Spaces with Stylish Outdoor Furniture
GUANGDONG SHUNDE BOSCHER ENVIRONMENTAL FURNITURE CO., LTD
©2024 Boscher Environmental Furniture Co., LTD Copyright All Rights Reserved Powered by:300.cn | SEO | Privacy